phanipavank/RP2040_Resources
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add blinky and more setup details

Browse Source
This commit is contained in:
Phani Pavan K
2024-02-21 20:34:11 +05:30
parent 761e39cc97
commit f73fb95733
3 changed files with 52 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
0_Introduction/setup.md
View File

@@ -2,7 +2,7 @@
### Dev Envitonment
Nobara 39 on a hand-me-down dual core dell laptop. An RPi Pico, programming over usb cable. Some wires, buttons, LEDs and resistors I <b>Borrowed</b> from lab.
Nobara/Fedora 39 on a hand-me-down dual core dell laptop. An RPi Pico, programming over usb cable. Some wires, buttons, LEDs and resistors I <b>Borrowed</b> from lab.
### Code Editor
Instead of using Arduino IDE, I use Visual Studio Code for programming. I use it because I (seem to) write code more efficiently and because I have it customized it to my liking.
@@ -15,7 +15,7 @@ Extensions I use:
### Project Generation
A C Pico project requires additional files to handle compilation: CMakeList.txt and pico_sdk_import.cmake, templates of both available in the installed pico sdk. To automate this, I use [Pico Project Generator](https://github.com/raspberrypi/pico-project-generator).
A C Pico project requires additional files to handle compilation: CMakeList.txt and pico_sdk_import.cmake, templates of both available in the installed pico sdk. To automate this, I am using [Pico Project Generator](https://github.com/raspberrypi/pico-project-generator) to generate the boilerplate code for the project. Most of the options are left default. The only changes are: `Console over USB` and `Create VSCode Project` are enabled.
<img src="../assets/picoProjGen.png" width="300">
@@ -40,7 +40,6 @@ So uploading the code requires following steps:
This will mount the pico as a storage device, to where the generated `.UF2` file should be copied.
## Hardware Setup
I have the RaspberryPi Pico Non-W variant: without the wireless chip. Soldered male jumper headers and mounted it onto a large breadboard. I am using solid copper wires for connections, because they stay in set shape.